Project RottenBottom - Page 4

Timmay · 01-11-2008, 02:27 PM

HAHAHAHA! Wow!

VTJeepCJ84 · 01-11-2008, 03:38 PM

how long do you think it would take him to notice if I put one side in the front and one in the back holes?

Timmay · 01-11-2008, 04:13 PM

Just tell him you swapped in a rear steering AMC20 but haven't hooked up the hydro ram yet.

xj_man_646 · 01-11-2008, 05:30 PM

Quote:

Originally Posted by VTJeepCJ84

how long do you think it would take him to notice if I put one side in the front and one in the back holes?

It wouldn't be long. The front passenger wheel on my old 98 XJ was 1" further to the rear than the driver's...I noticed it right away

bbaCJ8 · 01-11-2008, 06:55 PM

James you never cease to amaze me. I'm glad Stevie is building that whole thing.

6DoF · 01-11-2008, 11:27 PM

Quote:

Originally Posted by bbaCJ8

James you never cease to amaze me. I'm glad Stevie is building that whole thing.

x2, at least this time when someone built his rig for him, it was built right

Timmay · 01-11-2008, 11:28 PM

Quote:

Originally Posted by jeepnski

x2, at least this time when someone built his rig for him, it was built right

Ouch, that's low, especially coming from the Jankmaster himself.

bbaCJ8 · 01-12-2008, 12:39 AM

Quote:

Originally Posted by jeepnski

x2, at least this time when someone built his rig for him, it was built right

That gets a

and a

Nothing wrong with his last build.....it worked fine for what it was and got a lot more use than yours.

+1 for Timmay

6DoF · 01-12-2008, 01:01 AM

Quote:

Originally Posted by bbaCJ8

....... got a lot more use than yours.

i'm throwin a big ol BS flag on that one

VTJeepCJ84 · 01-12-2008, 02:41 AM

all i know is i need to get the fukker finished so i can start working on mine again, wheels and tires are getting ordered this week

tittie bar was calling my name tonigh so nothing got done on james' junk

xj_man_646 · 01-12-2008, 04:18 AM

Tittie bar > my sh1t or an¥one's sh1t any day of the week

xj_man_646 · 01-12-2008, 04:19 AM

Quote:

Originally Posted by bbaCJ8

James you never cease to amaze me. I'm glad Stevie is building that whole thing.

I hate you. Srsly. Die in a fire

xj_man_646 · 01-12-2008, 04:27 AM

Quote:

Originally Posted by jeepnski

i'm throwin a big ol BS flag on that one

I wouldn't since you are too much of a fukking vagina to run mud these days

xj_man_646 · 01-12-2008, 04:28 AM

Quote:

Originally Posted by jeepnski

x2, at least this time when someone built his rig for him, it was built right

Them's fightin words...I wish I could punch you right now, but I cant since you are in PA...so...here's an e-slap for you.

bbaCJ8 · 01-12-2008, 11:36 AM

Quote:

Originally Posted by xj_man_646

I wouldn't since you are too much of a fukking vagina to run mud these days

Mud, rock, sand, even more than a couple miles of pavement at a time. My truck got wheeled more times in the fall than the YJ did....I counted.

It'll be good to see Project Cumdumpster get used regularly.

6DoF · 01-12-2008, 11:54 AM

HA, thats funny. did your truck ever actually get dirty in all that "wheeling" it did?

Timmay · 01-12-2008, 01:15 PM

My jeep never gets dirty when I go wheelin. Whats your point?

xj_man_646 · 01-12-2008, 01:18 PM

Quote:

Originally Posted by Timmay

My jeep never gets dirty when I go wheelin. Whats your point?

U.P. wheeling = dirty.

Timmay · 01-12-2008, 01:19 PM

xj_man_646 · 01-12-2008, 01:56 PM

Quote:

Originally Posted by Timmay

bbaCJ8 · 01-12-2008, 03:47 PM

Really the important thing to note here is that James>Matt

Timmay · 01-12-2008, 04:02 PM

bbaCJ8 · 01-12-2008, 04:33 PM

Quote:

Originally Posted by Timmay

Don't be so shocked, it was just the abbreviated version......

Canada>Thornbirds>James>ScionXB>Matt

6DoF · 01-12-2008, 04:34 PM

Quote:

Originally Posted by bbaCJ8

Really the important thing to note here is that James>Matt

i surrender my seat to his skill and on trail prowess

i most humbly bow before my superior builder .... as he pays some else.

6DoF · 01-12-2008, 04:37 PM

Quote:

Originally Posted by bbaCJ8

Don't be so shocked, it was just the abbreviated version......

Canada>Thornbirds>James>ScionXB>Matt

xj_man_646 · 01-12-2008, 05:00 PM

Quote:

Originally Posted by jeepnski

i surrender my seat to his skill and on trail prowess

i most humbly bow before my superior builder .... as he pays some else.

I'm sorry I have already completed the mostly easy axle swap using only leaf springs

I wish you were in my position, then you'd understand the situation.

bbaCJ8 · 01-12-2008, 07:10 PM

Quote:

Originally Posted by xj_man_646

Udder bar > my sh1t or an¥one's sh1t any day of the week

Weird.....

Quote:

Originally Posted by xj_man_646

I'm sorry I have already completed the mostly easy axle swap using only leaf springs

I wish you were in my position, then you'd understand the situation.

Ummmmm.....the part you did WAS a leaf spring axle swap.

Here, I'll fix it:

Quote:

Originally Posted by xj_man_646

I wish you were in Stevie's position, then you'd understand the situation.

This is fun. James I've talked to you enough to understand why you had to do what you did but I'm still gonna give you sh1t about it. It'll be safe and get wheeled, so who really gives a sh1t? Bring on Project Cumdumpster!!

VTJeepCJ84 · 01-12-2008, 07:13 PM

Quote:

Originally Posted by bbaCJ8

Weird.....

yeah wierd how they didn't even twist my arm very hard.

bbaCJ8 · 01-12-2008, 07:14 PM

Quote:

Originally Posted by VTJeepCJ84

yeah wierd how they didn't even twist my arm very hard.

Read quote closer. You did the right thing for sure though. I expect pics next time I come in from the man cave.

VTJeepCJ84 · 01-12-2008, 08:26 PM

I guess I'll get this back sorta on topic.
Got the front axle where I want it, frame mount for the upper is shortened and extra holes so James can chage it if he feels so inclined.

going back out in a few minutes to put the cross membe back in again. and make the real upper link.

Timmay · 01-12-2008, 08:33 PM

Dude, clean your workbench.

VTJeepCJ84 · 01-12-2008, 08:38 PM

hahaha, yeah it's been a cluster fukk ever since I started workin on James' jeeps.

6DoF · 01-12-2008, 09:11 PM

Quote:

Originally Posted by VTJeepCJ84

hahaha, yeah it's been a cluster fukk ever since I started workin with James.

fixed it

you know were just givin ya **** dude, wish i could be around to help ya. and i can't imagine how ya feel with no way of being able to be there to help the build on your junk.

on a side note.... stevie ..... do you only clean it when someone else is coming to use the space?? and you are out there every night!

VTJeepCJ84 · 01-12-2008, 09:18 PM

I clean about once a month or so usually. the last time it was clean was when i did the floor. and james' jeeps have pretty much been there since

james' jeep keeps raining more rust and dirt.

the bench was cluttered then too, from stuff off the floor

Timmay · 01-12-2008, 09:29 PM

That's hella clean. Amazing what that floor paint does huh.

On that note, my nicely painted floor is now stained red.

Fukkin sami cage.

01-11-2008, 02:27 PM	#106
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	HAHAHAHA! Wow! __________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-11-2008, 03:38 PM	#107
VTJeepCJ84 Trail Guide Join Date: Mar 2004 Location: Cedar Rapids, IA Posts: 2,417	how long do you think it would take him to notice if I put one side in the front and one in the back holes? __________________ '84 CJ-7: mostly stock '07 Tundra '07 CBR 600RR (sold)

01-11-2008, 04:13 PM	#108
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	Just tell him you swapped in a rear steering AMC20 but haven't hooked up the hydro ram yet. __________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-11-2008, 06:55 PM	#110
bbaCJ8 old and boring Join Date: Mar 2003 Location: At the sh1tty end of Michigan Posts: 28,270	James you never cease to amaze me. I'm glad Stevie is building that whole thing. __________________ Dogs have the right idea: if you can't chew it, play with it, or hump it......piss on it and walk away.

01-12-2008, 02:41 AM	#115
VTJeepCJ84 Trail Guide Join Date: Mar 2004 Location: Cedar Rapids, IA Posts: 2,417	all i know is i need to get the fukker finished so i can start working on mine again, wheels and tires are getting ordered this week tittie bar was calling my name tonigh so nothing got done on james' junk __________________ '84 CJ-7: mostly stock '07 Tundra '07 CBR 600RR (sold)

01-12-2008, 01:15 PM	#122
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	My jeep never gets dirty when I go wheelin. Whats your point? __________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-12-2008, 01:19 PM	#124
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	__________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-12-2008, 03:47 PM	#126
bbaCJ8 old and boring Join Date: Mar 2003 Location: At the sh1tty end of Michigan Posts: 28,270	Really the important thing to note here is that James>Matt __________________ Dogs have the right idea: if you can't chew it, play with it, or hump it......piss on it and walk away.

01-12-2008, 04:02 PM	#127
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	__________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-12-2008, 08:26 PM	#135
VTJeepCJ84 Trail Guide Join Date: Mar 2004 Location: Cedar Rapids, IA Posts: 2,417	I guess I'll get this back sorta on topic. Got the front axle where I want it, frame mount for the upper is shortened and extra holes so James can chage it if he feels so inclined. going back out in a few minutes to put the cross membe back in again. and make the real upper link. __________________ '84 CJ-7: mostly stock '07 Tundra '07 CBR 600RR (sold)

01-12-2008, 08:33 PM	#136
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	Dude, clean your workbench. __________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD

01-12-2008, 08:38 PM	#137
VTJeepCJ84 Trail Guide Join Date: Mar 2004 Location: Cedar Rapids, IA Posts: 2,417	hahaha, yeah it's been a cluster fukk ever since I started workin on James' jeeps. __________________ '84 CJ-7: mostly stock '07 Tundra '07 CBR 600RR (sold)

01-12-2008, 09:18 PM	#139
VTJeepCJ84 Trail Guide Join Date: Mar 2004 Location: Cedar Rapids, IA Posts: 2,417	I clean about once a month or so usually. the last time it was clean was when i did the floor. and james' jeeps have pretty much been there since james' jeep keeps raining more rust and dirt. the bench was cluttered then too, from stuff off the floor __________________ '84 CJ-7: mostly stock '07 Tundra '07 CBR 600RR (sold)

01-12-2008, 09:29 PM	#140
Timmay Flux Core Pro Join Date: May 2004 Location: NJ/PA Posts: 18,593	That's hella clean. Amazing what that floor paint does huh. On that note, my nicely painted floor is now stained red. Fukkin sami cage. __________________ Tim Diekmann Liquid Iron Industries tim@liquidironindustries.com http://www.LiquidIronIndustries.com (856)-336-2639 '87 YJ turbo Comp/Race buggy in the works '00 1/2 of a 1 ton XJ '03 3/4 ton Cummity Cummins "The Black Knight" '03 KTM 450 - DD